Bentley Mulsanne Engine Oil Specs
Engine oil type, capacity & service interval for the Bentley Mulsanne (2011–2020). Select your year below for full specifications.
Choose Mulsanne year
Oil grade changes by year
Do not assume every Bentley Mulsanne year uses the same oil. Some years specify 5W-30 (years 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2012) while others specify 0W-40 (years 2013, 2011). Select your exact year and engine configuration before buying oil.
Select Year – Bentley Mulsanne Engine Oil
10 years foundBentley Mulsanne Engine Oil Specs by Year
All 10 years| Year | Engine | Oil Grade | Capacity | Interval | |
|---|---|---|---|---|---|
| 2020 | 6.8L 8-Cylinder | 5W-30 | 7.0 qt | 10,000 mi | View → |
| 2019 | 6.8L 8-Cylinder | 5W-30 | 7.0 qt | 7,500 mi | View → |
| 2018 | 6.8L 8-Cylinder | 5W-30 | 7.0 qt | 7,500 mi | View → |
| 2017 | 6.8L 8-Cylinder | 5W-30 | 7.0 qt | 7,500 mi | View → |
| 2016 | 6.8L 8-Cylinder | 5W-30 | 7.0 qt | 7,500 mi | View → |
| 2015 | 6.8L 8-Cylinder | 5W-30 | 7.0 qt | 7,500 mi | View → |
| 2014 | 6.8L 8-Cylinder | 5W-30 | 7.0 qt | 5,000 mi | View → |
| 2013 | 6.8L 8-Cylinder | 0W-40 | 5.2 qt | 7,500 mi | View → |
| 2012 | 6.8L 8-Cylinder | 5W-30 | 7.0 qt | 5,000 mi | View → |
| 2011 | 6.8L 8-Cylinder | 0W-40 | 5.2 qt | 7,500 mi | View → |
Bentley Mulsanne Engine Oil Guide
The Bentley Mulsanne was produced from 2011 to 2020. This model typically uses 5W-30 full synthetic engine oil — a specification common to most Bentley Mul-series vehicles.
Selecting the correct oil viscosity for your Bentley Mulsanne is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Bentley Mulsanne is every 10,000 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Bentley Mulsanne, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.
Oil change costs for the Bentley Mulsanne at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Bentley Mulsanne configurations may have different requirements.
Always use the viscosity grade recommended in your vehicle's owner's manual to ensure proper lubrication and maintain warranty coverage.
Perform periodic dipstick checks to ensure proper oil levels, especially prior to long road trips or heavy load use.