BMW ActiveHybrid 7i Engine Oil Specs
Engine oil type, capacity & service interval for the BMW ActiveHybrid 7i (2011–2011). Select your year below for full specifications.
Choose ActiveHybrid 7i year
Select Year – BMW ActiveHybrid 7i Engine Oil
1 year foundBMW ActiveHybrid 7i Engine Oil Specs by Year
All 1 years| Year | Engine | Oil Grade | Capacity | Interval | |
|---|---|---|---|---|---|
| 2011 | 4.4L 8-Cylinder | 5W-40 | 6.5 qt | 7,500 mi | View → |
BMW ActiveHybrid 7i Engine Oil Guide
The BMW ActiveHybrid 7i was produced from 2011 to 2011. This model typically uses 5W-40 full synthetic engine oil — a specification common to most BMW Act-series vehicles.
Selecting the correct oil viscosity for your BMW ActiveHybrid 7i is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the BMW ActiveHybrid 7i is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your BMW ActiveHybrid 7i, always replace the oil filter at every oil change. Using a premium filter — such as the Mann or Mahle filters specified for European engines — ensures proper oil pressure.
Oil change costs for the BMW ActiveHybrid 7i at a US dealership or independent European specialist typically range from $120 to $200 for a full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some BMW ActiveHybrid 7i configurations may have different requirements.
BMW engines require BMW Longlife-approved full synthetic oil. Using non-approved conventional oil can damage the variable valve timing (VANOS) system and void your warranty.
BMW engines may consume small amounts of oil between services. Check the oil level via the iDrive display or dipstick every 1,000 miles to avoid running low.