Ferrari 458 Speciale Spider Engine Oil Specs

Engine oil type, capacity & service interval for the Ferrari 458 Speciale Spider (2015–2015). Select your year below for full specifications.

Typical Oil Grade
5W-30
Capacity
6.5 qt
Change Interval
7,500 mi
Years Available
1

Choose 458 Speciale Spider year

Select Year – Ferrari 458 Speciale Spider Engine Oil

1 year found

Ferrari 458 Speciale Spider Engine Oil Specs by Year

All 1 years
Year Engine Oil Grade Capacity Interval
2015 4.5L 8-Cylinder 5W-30 6.5 qt 7,500 mi View →

Ferrari 458 Speciale Spider Engine Oil Guide

The Ferrari 458 Speciale Spider was produced from 2015 to 2015. This model typically uses 5W-30 full synthetic engine oil — a specification common to most Ferrari 458-series vehicles.

Selecting the correct oil viscosity for your Ferrari 458 Speciale Spider is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the Ferrari 458 Speciale Spider is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your Ferrari 458 Speciale Spider, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.

Oil change costs for the Ferrari 458 Speciale Spider at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Ferrari 458 Speciale Spider configurations may have different requirements.

⚠ Viscosity Caution

Always use the viscosity grade recommended in your vehicle's owner's manual to ensure proper lubrication and maintain warranty coverage.

Regular Service Check

Perform periodic dipstick checks to ensure proper oil levels, especially prior to long road trips or heavy load use.