Infiniti QX80 4WD (over 6000 lbs curb weight) Engine Oil Specs

The Infiniti QX80 4WD (over 6000 lbs curb weight) was produced from 2015 to 2015. This model typically uses 5W-30 full synthetic engine oil — a specification common to most Infiniti QX8-series vehicles.

Selecting the correct oil viscosity for your Infiniti QX80 4WD (over 6000 lbs curb weight) is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the Infiniti QX80 4WD (over 6000 lbs curb weight) is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your Infiniti QX80 4WD (over 6000 lbs curb weight), always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.

Oil change costs for the Infiniti QX80 4WD (over 6000 lbs curb weight) at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Infiniti QX80 4WD (over 6000 lbs curb weight) configurations may have different requirements.