Jaguar E-Pace P300 Engine Oil Specs
Engine oil type, capacity & service interval for the Jaguar E-Pace P300 (2019–2020). Select your year below for full specifications.
Choose E-Pace P300 year
Select Year – Jaguar E-Pace P300 Engine Oil
2 years foundJaguar E-Pace P300 Engine Oil Specs by Year
All 2 yearsJaguar E-Pace P300 Engine Oil Guide
The Jaguar E-Pace P300 was produced from 2019 to 2020. This model typically uses 0W-20 full synthetic engine oil — a specification common to most Jaguar E-P-series vehicles.
Selecting the correct oil viscosity for your Jaguar E-Pace P300 is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Jaguar E-Pace P300 is every 10,000 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Jaguar E-Pace P300, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.
Oil change costs for the Jaguar E-Pace P300 at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Jaguar E-Pace P300 configurations may have different requirements.
Always use the viscosity grade recommended in your vehicle's owner's manual to ensure proper lubrication and maintain warranty coverage.
Perform periodic dipstick checks to ensure proper oil levels, especially prior to long road trips or heavy load use.