Kia Sorento FE AWD Engine Oil Specs

Engine oil type, capacity & service interval for the Kia Sorento FE AWD (2016–2018). Select your year below for full specifications.

Typical Oil Grade
5W-30
Capacity
6.0 qt
Change Interval
7,500 mi
Years Available
3

Choose Sorento FE AWD year

Select Year – Kia Sorento FE AWD Engine Oil

3 years found

Kia Sorento FE AWD Engine Oil Specs by Year

All 3 years
Year Engine Oil Grade Capacity Interval
2018 3.3L 6-Cylinder 5W-30 6.0 qt 7,500 mi View →
2017 3.3L 6-Cylinder 5W-30 6.0 qt 7,500 mi View →
2016 3.3L 6-Cylinder 5W-30 6.0 qt 7,500 mi View →

Kia Sorento FE AWD Engine Oil Guide

The Kia Sorento FE AWD was produced from 2016 to 2018. This model typically uses 5W-30 full synthetic engine oil — a specification common to most Kia Sor-series vehicles.

Selecting the correct oil viscosity for your Kia Sorento FE AWD is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the Kia Sorento FE AWD is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your Kia Sorento FE AWD, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.

Oil change costs for the Kia Sorento FE AWD at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Kia Sorento FE AWD configurations may have different requirements.

⚠ Viscosity Caution

Always use the viscosity grade recommended in your vehicle's owner's manual to ensure proper lubrication and maintain warranty coverage.

Regular Service Check

Perform periodic dipstick checks to ensure proper oil levels, especially prior to long road trips or heavy load use.