MINI John Cooper Works Engine Oil Specs
Engine oil type, capacity & service interval for the MINI John Cooper Works (2009–2013). Select your year below for full specifications.
Choose John Cooper Works year
Oil grade changes by year
Do not assume every MINI John Cooper Works year uses the same oil. Some years specify 5W-20 (years 2013, 2011, 2010) while others specify 0W-30 (years 2012, 2009). Select your exact year and engine configuration before buying oil.
Select Year – MINI John Cooper Works Engine Oil
5 years foundMINI John Cooper Works Engine Oil Specs by Year
All 5 yearsMINI John Cooper Works Engine Oil Guide
The MINI John Cooper Works was produced from 2009 to 2013. This model typically uses 5W-20 full synthetic engine oil — a specification common to most MINI Joh-series vehicles.
Selecting the correct oil viscosity for your MINI John Cooper Works is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the MINI John Cooper Works is every 5,000 miles or 6 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your MINI John Cooper Works, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.
Oil change costs for the MINI John Cooper Works at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some MINI John Cooper Works configurations may have different requirements.
Always use the viscosity grade recommended in your vehicle's owner's manual to ensure proper lubrication and maintain warranty coverage.
Perform periodic dipstick checks to ensure proper oil levels, especially prior to long road trips or heavy load use.