Porsche Cayenne Diesel Engine Oil Specs
Engine oil type, capacity & service interval for the Porsche Cayenne Diesel (2013–2016). Select your year below for full specifications.
Choose Cayenne Diesel year
Oil grade changes by year
Do not assume every Porsche Cayenne Diesel year uses the same oil. Some years specify 0W-40 (years 2016, 2015) while others specify 5W-40 (years 2014, 2013). Select your exact year and engine configuration before buying oil.
Select Year – Porsche Cayenne Diesel Engine Oil
4 years foundPorsche Cayenne Diesel Engine Oil Specs by Year
All 4 yearsPorsche Cayenne Diesel Engine Oil Guide
The Porsche Cayenne Diesel was produced from 2013 to 2016. This model typically uses 0W-40 full synthetic engine oil — a specification common to most Porsche Cay-series vehicles.
Selecting the correct oil viscosity for your Porsche Cayenne Diesel is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Porsche Cayenne Diesel is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Porsche Cayenne Diesel, always replace the oil filter at every oil change. Using a premium filter — such as the Mann or Mahle filters specified for European engines — ensures proper oil pressure.
Oil change costs for the Porsche Cayenne Diesel at a US dealership or independent European specialist typically range from $120 to $200 for a full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Porsche Cayenne Diesel configurations may have different requirements.
Porsche requires approved oils (e.g. Porsche A40 or C30) to protect internal chain gears and flat-tappet systems.
Keep strict tabs on oil levels in these performance engines to ensure appropriate flow under high speed or heavy cornering stresses.