Toyota 4Runner 4WD Engine Oil Specs
Engine oil type, capacity & service interval for the Toyota 4Runner 4WD (2000–2026). Select your year below for full specifications.
Select Year – Toyota 4Runner 4WD Engine Oil
27 years foundToyota 4Runner 4WD Engine Oil Specs by Year
All 27 years| Year | Engine | Oil Grade | Capacity | Interval | |
|---|---|---|---|---|---|
| 2026 | 2.4L 4-Cylinder | 0W-20 | 4.7 qt | 10,000 mi | View → |
| 2025 | 2.4L 4-Cylinder | 0W-20 | 4.7 qt | 10,000 mi | View → |
| 2024 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 10,000 mi | View → |
| 2023 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 10,000 mi | View → |
| 2022 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 10,000 mi | View → |
| 2021 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 10,000 mi | View → |
| 2020 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 10,000 mi | View → |
| 2019 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2018 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2017 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2016 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2015 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2014 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 5,000 mi | View → |
| 2013 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 5,000 mi | View → |
| 2012 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 5,000 mi | View → |
| 2011 | 4L 6-Cylinder | 5W-30 | 6.0 qt | 5,000 mi | View → |
| 2010 | 4L 6-Cylinder | 5W-30 | 5.0 qt | 7,500 mi | View → |
| 2009 | 4.7L 8-Cylinder | 10W-30 | 6.5 qt | 5,000 mi | View → |
| 2008 | 4.7L 8-Cylinder | 5W-30 | 6.5 qt | 5,000 mi | View → |
| 2007 | 4.7L 8-Cylinder | 10W-30 | 6.5 qt | 5,000 mi | View → |
| 2006 | 4.7L 8-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2005 | 4.7L 8-Cylinder | 5W-30 | 6.5 qt | 7,500 mi | View → |
| 2004 | 4.7L 8-Cylinder | 10W-30 | 7.0 qt | 7,500 mi | View → |
| 2003 | 4.7L 8-Cylinder | 10W-30 | 7.5 qt | 5,000 mi | View → |
| 2002 | 3.4L 6-Cylinder | 5W-30 | 4.6 qt | 5,000 mi | View → |
| 2001 | 3.4L 6-Cylinder | 5W-20 | 4.5 qt | 7,500 mi | View → |
| 2000 | 3.4L 6-Cylinder | 5W-30 | 5.5 qt | 7,500 mi | View → |
Toyota 4Runner 4WD Engine Oil Guide
The Toyota 4Runner 4WD was produced from 2000 to 2026. This model typically uses 0W-20 full synthetic engine oil — a specification common to most Toyota 4Ru-series vehicles.
Selecting the correct oil viscosity for your Toyota 4Runner 4WD is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the Toyota 4Runner 4WD is every 10,000 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your Toyota 4Runner 4WD, always replace the oil filter at every oil change. Using a quality filter — such as the Mann or Mahle filters specified for Toyota engines — ensures proper oil pressure and prevents unfiltered oil from circulating through the engine.
Oil change costs for the Toyota 4Runner 4WD at a US dealership or independent European specialist typically range from $120 to $200 for a full synthetic service. DIY oil changes cost approximately $60–$90 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Toyota 4Runner 4WD configurations may have different requirements.
Toyota engines require BMW Longlife-approved full synthetic oil. Using non-approved conventional oil can damage the variable valve timing (VANOS) system and void your warranty.
Toyota engines may consume small amounts of oil between services. Check the oil level via the iDrive display or dipstick every 1,000 miles to avoid running low, especially in older models.