GMC Canyon 4WD Engine Oil Specs
Engine oil type, capacity & service interval for the GMC Canyon 4WD (2004–2026). Select your year below for full specifications.
Choose Canyon 4WD year
Oil grade changes by year
Do not assume every GMC Canyon 4WD year uses the same oil. Some years specify 5W-30 (years 2026, 2025, 2024, 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, 2012, 2011, 2010, 2009, 2008, 2007, 2004) while others specify 0W-20 (years 2020) while others specify 5W-20 (years 2006, 2005). Select your exact year and engine configuration before buying oil.
Select Year – GMC Canyon 4WD Engine Oil
21 years foundGMC Canyon 4WD Engine Oil Specs by Year
All 21 years| Year | Engine | Oil Grade | Capacity | Interval | |
|---|---|---|---|---|---|
| 2026 | 2.7L 4-Cylinder | 5W-30 | 4.5 qt | 10,000 mi | View → |
| 2025 | 2.7L 4-Cylinder | 5W-30 | 4.5 qt | 10,000 mi | View → |
| 2024 | 2.7L 4-Cylinder | 5W-30 | 4.5 qt | 10,000 mi | View → |
| 2023 | 2.7L 4-Cylinder | 5W-30 | 4.5 qt | 10,000 mi | View → |
| 2022 | 2.8L 4-Cylinder | 5W-30 | 4.5 qt | 7,500 mi | View → |
| 2021 | 2.8L 4-Cylinder | 5W-30 | 4.5 qt | 7,500 mi | View → |
| 2020 | 2.5L 4-Cylinder | 0W-20 | 4.7 qt | 10,000 mi | View → |
| 2019 | 3.6L 6-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2018 | 3.6L 6-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2017 | 2.8L 4-Cylinder | 5W-30 | 4.5 qt | 7,500 mi | View → |
| 2016 | 2.8L 4-Cylinder | 5W-30 | 4.5 qt | 7,500 mi | View → |
| 2015 | 2.5L 4-Cylinder | 5W-30 | 4.7 qt | 7,500 mi | View → |
| 2012 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 5,000 mi | View → |
| 2011 | 5.3L 8-Cylinder | 5W-30 | 7.0 qt | 5,000 mi | View → |
| 2010 | 5.3L 8-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2009 | 5.3L 8-Cylinder | 5W-30 | 7.0 qt | 5,000 mi | View → |
| 2008 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 7,500 mi | View → |
| 2007 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 5,000 mi | View → |
| 2006 | 3.5L 5-Cylinder | 5W-20 | 4.0 qt | 5,000 mi | View → |
| 2005 | 3.5L 5-Cylinder | 5W-20 | 4.0 qt | 5,000 mi | View → |
| 2004 | 3.5L 5-Cylinder | 5W-30 | 4.5 qt | 5,000 mi | View → |
GMC Canyon 4WD Engine Oil Guide
The GMC Canyon 4WD was produced from 2004 to 2026. This model typically uses 5W-30 full synthetic engine oil — a specification common to most GMC Can-series vehicles.
Selecting the correct oil viscosity for your GMC Canyon 4WD is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the GMC Canyon 4WD is every 10,000 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your GMC Canyon 4WD, always replace the oil filter at every oil change. Using a quality filter — such as ACDelco or Mobil 1 filters matching GM specifications — helps maintain optimal filtration.
Oil change costs for the GMC Canyon 4WD at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some GMC Canyon 4WD configurations may have different requirements.
General Motors engines require oil certified with the dexos1 Gen 3 or dexos2 standard to protect direct-injection valvetrains.
Reset the Engine Oil Life system via the driver information center or by pumping the accelerator pedal three times with ignition ON.