GMC Canyon Cab Chassis Inc 2WD Engine Oil Specs
Engine oil type, capacity & service interval for the GMC Canyon Cab Chassis Inc 2WD (2006–2012). Select your year below for full specifications.
Choose Canyon Cab Chassis Inc 2WD year
Select Year – GMC Canyon Cab Chassis Inc 2WD Engine Oil
7 years foundGMC Canyon Cab Chassis Inc 2WD Engine Oil Specs by Year
All 7 years| Year | Engine | Oil Grade | Capacity | Interval | |
|---|---|---|---|---|---|
| 2012 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 5,000 mi | View → |
| 2011 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 5,000 mi | View → |
| 2010 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 7,500 mi | View → |
| 2009 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 5,000 mi | View → |
| 2008 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 7,500 mi | View → |
| 2007 | 3.7L 5-Cylinder | 5W-30 | 4.5 qt | 5,000 mi | View → |
| 2006 | 3.5L 5-Cylinder | 5W-30 | 4.5 qt | 5,000 mi | View → |
GMC Canyon Cab Chassis Inc 2WD Engine Oil Guide
The GMC Canyon Cab Chassis Inc 2WD was produced from 2006 to 2012. This model typically uses 5W-30 full synthetic engine oil — a specification common to most GMC Can-series vehicles.
Selecting the correct oil viscosity for your GMC Canyon Cab Chassis Inc 2WD is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the GMC Canyon Cab Chassis Inc 2WD is every 5,000 miles or 6 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your GMC Canyon Cab Chassis Inc 2WD, always replace the oil filter at every oil change. Using a quality filter — such as ACDelco or Mobil 1 filters matching GM specifications — helps maintain optimal filtration.
Oil change costs for the GMC Canyon Cab Chassis Inc 2WD at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some GMC Canyon Cab Chassis Inc 2WD configurations may have different requirements.
General Motors engines require oil certified with the dexos1 Gen 3 or dexos2 standard to protect direct-injection valvetrains.
Reset the Engine Oil Life system via the driver information center or by pumping the accelerator pedal three times with ignition ON.