GMC Savana 2500 2WD (Passenger) Engine Oil Specs

The GMC Savana 2500 2WD (Passenger) was produced from 2011 to 2017. This model typically uses 5W-30 full synthetic engine oil — a specification common to most GMC Sav-series vehicles.

Selecting the correct oil viscosity for your GMC Savana 2500 2WD (Passenger) is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the GMC Savana 2500 2WD (Passenger) is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your GMC Savana 2500 2WD (Passenger), always replace the oil filter at every oil change. Using a quality filter — such as ACDelco or Mobil 1 filters matching GM specifications — helps maintain optimal filtration.

Oil change costs for the GMC Savana 2500 2WD (Passenger) at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some GMC Savana 2500 2WD (Passenger) configurations may have different requirements.