GMC Terrain FWD Engine Oil Specs
Engine oil type, capacity & service interval for the GMC Terrain FWD (2010–2026). Select your year below for full specifications.
Choose Terrain FWD year
Oil grade changes by year
Do not assume every GMC Terrain FWD year uses the same oil. Some years specify 0W-20 (years 2026, 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018) while others specify 5W-30 (years 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010). Select your exact year and engine configuration before buying oil.
Select Year – GMC Terrain FWD Engine Oil
17 years foundGMC Terrain FWD Engine Oil Specs by Year
All 17 years| Year | Engine | Oil Grade | Capacity | Interval | |
|---|---|---|---|---|---|
| 2026 | 1.5L 4-Cylinder | 0W-20 | 3.7 qt | 10,000 mi | View → |
| 2025 | 1.5L 4-Cylinder | 0W-20 | 3.7 qt | 10,000 mi | View → |
| 2024 | 1.5L 4-Cylinder | 0W-20 | 3.7 qt | 10,000 mi | View → |
| 2023 | 1.5L 4-Cylinder | 0W-20 | 3.7 qt | 10,000 mi | View → |
| 2022 | 1.5L 4-Cylinder | 0W-20 | 3.7 qt | 10,000 mi | View → |
| 2021 | 1.5L 4-Cylinder | 0W-20 | 3.7 qt | 10,000 mi | View → |
| 2020 | 2L 4-Cylinder | 0W-20 | 4.2 qt | 10,000 mi | View → |
| 2019 | 1.6L 4-Cylinder | 0W-20 | 3.7 qt | 7,500 mi | View → |
| 2018 | 1.6L 4-Cylinder | 0W-20 | 3.7 qt | 7,500 mi | View → |
| 2017 | 2.4L 4-Cylinder | 5W-30 | 4.7 qt | 7,500 mi | View → |
| 2016 | 3.6L 6-Cylinder | 5W-30 | 6.0 qt | 7,500 mi | View → |
| 2015 | 2.4L 4-Cylinder | 5W-30 | 4.7 qt | 7,500 mi | View → |
| 2014 | 2.4L 4-Cylinder | 5W-30 | 4.7 qt | 5,000 mi | View → |
| 2013 | 3.6L 6-Cylinder | 5W-30 | 6.0 qt | 5,000 mi | View → |
| 2012 | 2.4L 4-Cylinder | 5W-30 | 4.7 qt | 5,000 mi | View → |
| 2011 | 3L 6-Cylinder | 5W-30 | 5.5 qt | 5,000 mi | View → |
| 2010 | 3L 6-Cylinder | 5W-30 | 5.5 qt | 5,000 mi | View → |
GMC Terrain FWD Engine Oil Guide
The GMC Terrain FWD was produced from 2010 to 2026. This model typically uses 0W-20 full synthetic engine oil — a specification common to most GMC Ter-series vehicles.
Selecting the correct oil viscosity for your GMC Terrain FWD is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.
The recommended oil change interval for the GMC Terrain FWD is every 10,000 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.
When servicing your GMC Terrain FWD, always replace the oil filter at every oil change. Using a quality filter — such as ACDelco or Mobil 1 filters matching GM specifications — helps maintain optimal filtration.
Oil change costs for the GMC Terrain FWD at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.
Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some GMC Terrain FWD configurations may have different requirements.
General Motors engines require oil certified with the dexos1 Gen 3 or dexos2 standard to protect direct-injection valvetrains.
Reset the Engine Oil Life system via the driver information center or by pumping the accelerator pedal three times with ignition ON.