Toyota Sequoia 4WD FFV Engine Oil Specs

The Toyota Sequoia 4WD FFV was produced from 2010 to 2018. This model typically uses 5W-30 full synthetic engine oil — a specification common to most Toyota Seq-series vehicles.

Selecting the correct oil viscosity for your Toyota Sequoia 4WD FFV is essential. Using a grade that is too thin reduces protection at operating temperature, while too thick an oil impairs cold-start flow and reduces fuel economy. Always match the exact grade shown for your specific model year.

The recommended oil change interval for the Toyota Sequoia 4WD FFV is every 7,500 miles or 12 months. Under severe driving conditions — track use, towing, or frequent cold starts — shorten this interval by 25–30%.

When servicing your Toyota Sequoia 4WD FFV, always replace the oil filter at every oil change. Using a quality filter — such as Fram, Mobil 1, or OEM equivalent filters — ensures clean oil circulation through the engine block.

Oil change costs for the Toyota Sequoia 4WD FFV at a US dealership or local service center typically range from $60 to $110 for a standard synthetic blend or full synthetic service. DIY oil changes cost approximately $30–$65 in parts (oil + filter) and take about 30 minutes with the right tools.

Always consult your vehicle's owner's manual to confirm the exact specification for your specific trim and engine variant, as some Toyota Sequoia 4WD FFV configurations may have different requirements.